
A/C performance test inspection
2019 Nissan-Datsun Maxima V6-3.5L
A/C Performance test-Inspection
AIR CONDITIONING INSPECTION PROCEDURE:
- Connect recovery/recycling/recharging equipment (For HFC-134a) or manifold gauge.
- Start the engine, and set to the following condition.
Surrounding condition | Indoors or in the shade(in a well-ventilated place) | |
Vehicle condition |
Door | Closed |
Door glass | Full open | |
Hood | Open | |
Engine speed | Idle speed | |
A/C condition | Temperature control switch or dial | Full cold |
A/C switch | ON | |
Air outlet | Vent(ventilation) | |
Intake door position | Recirculation | |
Fan(blower) speed | Maximum speed set |
- Maintain test condition until A/C system becomes stable.(Approximately 10 minutes)
- Check that test results of recirculating-to-discharge air temperature and ambient air temperature-to-operating pressure are within the specified value.
- When test results are within the specified value, inspection is complete.
If any of test result is out of the specified value Click Here
Inside air (Recirculating air) at blower assembly inlet. | Discharge air temperature from center ventilator C / F | ||
Relative humidity % |
Air Temperature C/F |
1st Row | 2nd Row |
50-60 | 25 (77) | 9.6-10.7 (49-51) | 9.8-11.0(50-52) |
30 (86) | 9.5-10.5 (49-51) | 10.2-11.3 (50-52) | |
35 (95) | 13.9-15.0 (57-59) | 15.2-16.4 (59-62) | |
40 (104) | 16.9-18.8 (62-66) | 17.8-19.8 (64-68) | |
60-70 | 25 (77) | 10.7-11.9 (51-53) | 11.0-12.3 (52-54) |
30 (86) | 10.5-11.5 (51-53) | 11.3-12.4 (52-54) | |
35 (95) | 15.0-16.1 (59-61) | 16.4-17.6 (62-64) | |
40 (104) | 18.8-20.7 (66-69) | 19.8-21.8 (68-71) |
AMBIENT AIR TEMPERATURE-TO-OPERATING PRESSURE TABLE
Fresh air | High-pressure (Discharge side) Kpa (kg/cm2,psi) | Low-pressure (Suction side) Kpa (kg/cm2,psi) | |
Relative humidity % | Air temperature C / F | ||
50-70 | 25 (77) | 1020-1255 (10.4-12.8,148-182) |
225-285 (2.3-2.9,33-41) |
30 (86) | 1020-1255 (10.4-12.8,148-182) |
215-265 (2.2-2.7,33-38) |
|
35 (95) | 1196-1461 (12.2-14.9,174-212) |
215-265 (2.2-2.7,33-38) |
|
40 (104) | 1471-1804 (15.0-18.4,213-262) |
285-345 (2.9-3.5,41-50) |